The Top 5 Reasons Why Drains Block

Blocked drains are a common household problem. They can be caused by a number of factors, such as tree roots, excessive use of detergents and chemicals, or even the result of an accident.

A blocked drain is not only an inconvenience, but it’s also costly. It can cost up to £100 to unblock a drain and if the blockage continues, you may need to call in a specialist plumber who will charge you even more.

Here are the top 5 reasons why drains block:

 

• Tree roots: If your drain tree roots block, they need to be removed before the problem can be fixed.
• Detergent: Detergents and other chemicals can cause blockages in drains when they’re poured down them or washed down them.
• Accident: If you have an accident that causes a blocked drain, it needs to be cleaned out with water before it’s fixed.
• Blockage: A blockage can cause a slow draining pipe, a significant build up of wastewater or flooding.
• How to fix a blocked drain: Pour boiling water down the drain and wait for one hour.
• Use non-corrosive cleaners that contain bleach or hydrogen peroxide.
• Add pipe jacks and other plumbing tools to unblock the drain.

How to Fix a Blockage in a Drain?

 

You might have a blocked drain in your house or business, and you are not sure what to do. This section will give you some ideas on how to unblock your drains.

How to unblock a drain:

1) Place a bucket under the drain and fill it with cold water.

2) Place a plunger at the bottom of the drain pipe and push down on it until water starts flowing out again.

3) Pour baking soda down the drain pipe before using the plunger method.

4) Pour boiling water down the drain pipe before using the plunger method.

5) Pour vinegar down the drain pipe before using the plunger method.

6) Pour salt or detergent down the drain pipe before using the plunger method.

7) In a pinch, use Vicks Vapour Rub and a bandana to plug up a clogged sink tap.

8) Plug a sink drain with your hand, as it would be difficult to use the plunger.

9) Wrap an old tight around your hand to plug up a sink drain.

10) Securely wrap an old towel around your hand and then plug the sink drain with it.

11) For a small sink, you may be able to use a du-rag or toilet paper roll to plug up the clog until you can get the plunger in place.

12) Use a rubbish disposal cleaner down kitchen drains before using either of these methods.

What are Drain Cleaners and Sump Pumps?

 

Sump pumps are a type of drain cleaners that are used to remove water from the sump of a building. Generally used in basements, crawl spaces and other areas where there is little or no natural drainage. Electricity powers sump pumps. A sump pump is intended to remove water from a basement, but also helps prevent damage due to flooding. This makes it a useful item in home repair projects such as construction of a new basement or during the winter when icy rainwater has made flooding more likely.

A natural barrier typically require the use of a sump pump. Groundwater can enter the building at the lowest point and potentially cause damage to the foundation, walls, or roof in some cases. Typically used in commercial buildings (e.g., distribution centres) as well as residential buildings with basements. The typical construction of a sump pump includes a motor and an attached impeller that rotates as it sucks water into its base. Usually an open container shaped like a bowl with vertical sloping sides, called a basin, placed in an underground trench. Electricity can manually operate or run a sump pump. When the power goes out and the water level rises to a dangerous level, the sump pump can overflow into your living area and cause flooding.

What to do if your Sump Pump is on the blink?

 

If your sump pump has stopped working, you will need to replace it. There are a few things you can do to try and get the pump working again before calling a professional plumber.

The first thing to do is check the power cord and make sure that you plug in it properly. If the cord is faulty, then you should replace it. If not, then you should check the power switch on the pump itself. Furthermore, if that doesn’t work, then you will need to call a plumber for help. The suction hose may be clogged with debris, so check that out. If not, then you will need to replace the hose. Replacing the hoses is a fairly easy task for most people, though it can become quite frustrating if you are unsure where to start.

If the questions remain, then the first thing to do is to go ahead and remove the hose from the pressure washer. After that, you will need to find a way to disconnect it. Loosening up any screws or clips can do this. Another option for disconnecting is by simply cutting through it with a knife or saw. Be careful in doing this, though—you never know if there are any chemical fumes present when you are removing hoses because of their gas-powered nature!

Emergency Plumber Services UK

 

Emergency Plumber Services UK offer 24-hour emergency plumbers to unblock drains in Nottingham. When you need a plumber, it is important to contact the right company, and Emergency Plumber Services UK are the best company for this job. Emergency Plumber Services UK are available 7 days a week, 24 hours a day to help you with all your emergency plumbing problems. They offer both residential and commercial service, and they are experts in the following areas:

• Sewer blockages
• Toilet repairs
• Kitchen sink repair/unclogging
• Leaking pipes/water leaks
• Burst pipes/flooding
• Burst water pipes
• Emergency water shutoff
• Water leak repair/repairing outdoor ponds

Emergency Plumber Services UK have the knowledge and skills necessary to work quickly in any situation. They use the latest technology when they are working on your project, and they will always provide you with a written estimate of their services before they start their job. Contact Emergency Plumber Services UK for emergency plumbing requires you may have.